PDA

View Full Version : ddr3(x58/p55) on p45/x48(ddr3)

Hondacity
05-11-2010, 02:55 PM
well its been mentioned by Gunslinger and i forget who...

thanks for mentioning using it....

this very well made me decide to hop on the 775 platform again ..

i'll post some results once the mobo arrives, hopefully my cpu is good..and the nb good...and the bios good...:ohcrap:
HITandRUN
05-11-2010, 03:06 PM
Good luck with that mate! Like I said in the other thread it should be no problem with the X58 ram. I ran out of time for today benching but tomorrow is E8700 + EP45T-USB3P and SuperTalent CAS8 2200Mhz time! When the combo performs it will be o1 and 03 time with the modded GTX470. :thumbsup:
Hondacity
05-11-2010, 03:12 PM
hahahha almost the same setup...

i was looking at the gigabyte p45 ddr3 board....same rams..but i'll use my kingstons first just to be sure....

oh yeah notes of mine says 1.6v on the nb of p45.....and a pot :D or use a thermalright tower on the nb

lemme know what happens:thumbsup:
HITandRUN
05-11-2010, 03:46 PM
hahahha almost the same setup...

i was looking at the gigabyte p45 ddr3 board....same rams..but i'll use my kingstons first just to be sure....

oh yeah notes of mine says 1.6v on the nb of p45.....and a pot :D or use a thermalright tower on the nb

lemme know what happens:thumbsup:

I'm still deciding on the NB cooling. I mean the P45 runs so cool any way and I pretested the FSB already. I can hit 600FSB stable and 630 CPUZ on stock volts. Seems like there is no need to go all out on the NB. I might throw water on it just to see if this makes any difference.
Hondacity
05-11-2010, 03:48 PM
600? WOOOW

thats 6300mhz with 10.5x

can i see memory subtiming? vdimm? :D

woooo great stuff :D
HITandRUN
05-11-2010, 03:52 PM
600? WOOOW

thats 6300mhz with 10.5x

can i see memory subtiming? vdimm? :D

woooo great stuff :D

Yeah I tested on a 7 multi so we so how she runs when I slam 2V in there. Also CB is my FEAR since I'm on cascade so she needs to be good for at least -125C ;)
Chuchnit
05-11-2010, 03:52 PM
The only thing the cooler NB will do on the P45 is probably allow for tighter PL. X48 does run a little warm though.
HITandRUN
05-11-2010, 03:56 PM
The only thing the cooler NB will do on the P45 is probably allow for tighter PL. X48 does run a little warm though.

Yeah I remember the old good days of the BLackOps and the NB on LN2. :thumbsup: It made sens to use it on X48.
Chuchnit
05-11-2010, 04:05 PM
Yeah I remember the old good days of the BLackOps and the NB on LN2. :thumbsup: It made sens to use it on X48.

That's one board I wish I had got to play with. I still wonder if that board could have competed with the REX if it had proper bios support??
Hondacity
05-11-2010, 05:47 PM
The only thing the cooler NB will do on the P45 is probably allow for tighter PL. X48 does run a little warm though.

the northbridge is around 50w over 1.6v...slapping a pot is easy...no need to go -90c just -40c....is good..and you don't need to over insulate...

once its subzero you can pretty much push the nb...

ln2 on p45's northbridge


http://hwbot.org/community/submission/972015_bennylodewijk_reference_clock_ga_ep45t_extr eme_750.92_mhz

http://hwbot.org/community/submission/938347_angoholic_reference_clock_lanparty_dk_p45_t 2rs_plus_735_mhz

http://hwbot.org/community/submission/948302_pt1t_reference_clock_tpower_i45_725.5_mhz

http://hwbot.org/community/submission/946602_vivi_reference_clock_ga_ep45t_extreme_705.5 8_mhz