LGA775 Celeron 440 - cannot raise fsb?!

[Jor-El]

Hi guys,

I'm working on uniting the PCM05 globals and I'm testing a Celeron 440 with my Gigabyte P45-UD3P for the 1x core category (Rom please don't kill me hahahahha).

The problem is setfsb shows I max out at 375fsb... I also tried to use the ETuner and I cannot raise the Celeron past 375fsb?! Well I need at least 450fsb to get #1 global so what should I do, is this a board limitation?

http://img9.imageshack.us/img9/7633/celeronproblem.th.jpg (http://img9.imageshack.us/i/celeronproblem.jpg/)

Even using a different clock generator to allow raise past 375fsb it will stay at 375fsb no matter what...

[HITandRUN]

Click on customize tab and than on lower the number at PLL M. Wile you doing this you will see your slider button moving back so you have more increase space. I hope this is what you mean! Good luck!

[Jor-El]

Click on customize tab and than on lower the number at PLL M. Wile you doing this you will see your slider button moving back so you have more increase space. I hope this is what you mean! Good luck!

Hey man thanks but actually after 375fsb it stops raising, you see on my screen shot the setfsb is at 406 and real is 375 (look cpuz).

[Hondacity]

vnb? nb voltage?

[Jor-El]

vnb? nb voltage?

NB at 1.6v

[Neuromancer]

Hmm

What BIOS you using? Have you loosened PL settings or tried a different strap?

Have you tried booting at 401 and then running SETFSB and see if it works?

[Jor-El]

Hmm

What BIOS you using? Have you loosened PL settings or tried a different strap?

Have you tried booting at 401 and then running SETFSB and see if it works?

Bios is F6, maybe I should try to flash with an older BIOS like F2?

I tried everything and it's just stuck there once clockgen passes 374fsb.

The board will not boot above 300fsb. I'm starting to believe on board limitation but that's so weird same board can take a Quad to 550fsb...

[Neuromancer]

Might just be a dud chip? a core2 arch that wont boot at +50% OC is kinda weak ;)

[Jor-El]

Might just be a dud chip? a core2 arch that wont boot at +50% OC is kinda week ;)

Ok yes maybe, if you guys have any Celeron 440 that can do 4500 + let me know!

I just got the 2x Global Cup back and now I want 1x and 3x before I start 4x and the 980Gt. :thumbsup:

[Splave]

how about you bench your 980x ya numbskull rofl! ;) jk jk Im just bitter because Im SOL this weekend.

[Jor-El]

how about you bench your 980x ya numbskull rofl! ;) jk jk Im just bitter because Im SOL this weekend.

I knew someone would say that soon enough! :)

The RexIII is prepped and ready to roll tomorrow on the Cascade, going to get use to the board first and then Ln2. Spla I may need your input on this one. :thumbsup:

[Splave]

Any way I can help let me know :) ask the rom for my number if need be ;)

[Hondacity]

have you tried the bsel mod?

http://www.tipidpc.com/viewtopic.php?tid=98439&page=1

[kikicoco1334]

have you tried the bsel mod?

http://www.tipidpc.com/viewtopic.php?tid=98439&page=1

correct me if i am wrong, but like BSEL mod isn't that just for motherboards that can't overclock, and if you do that and overclock on top of that wouldn't it be just overclocking flat with out the mod?
cuz the chip has it's limitation, and what ever way it overclocks once it hits the limitation it will stop?

at least that was what it looked like when i did it :Dizzy:
and same as the ram, when i flashed the SPD it was like that too, no matter what it's SPD is, it's only faster on "stock" it will not really overclock sky higher

[Hondacity]

you need the bsel mod...for fsb clocking thats how i see it...i'll be studying it some more.

http://www.xtremesystems.org/forums/showpost.php?p=3577692&postcount=19

as for ram its different...ram spd profiles aren't my thing...