PDA

View Full Version : Modded P5B-Deluxe with P4 631 Cedar Mill

Cecil
03-28-2010, 05:13 PM
Finally got a hold of a P5B-Deluxe for cheap, that just so happens to have vcore and vdimm mods already done. Also got a couple sets of Gskill HZ D9s for cheap as well.
Have a P4 631 for testing. Wasnt sure where to start first since Ive never toyed with P4s, so I bumped up to 266FSB, 1.45vcore, 2.1vdimm, 1.45NB. That went smoothly, so now trying 280FSB, same volts. Ram is at 933Mhz 4-4-4-12. Testing with Intel burn test to see where Im at. 52C load so far.
Going to see where I can get with air, then put it under water. Once Im tapped out, Ill try it out with DICE when I get a chance.

Here is my bench setup till I get a loop going. When I do, the rad will be mounted to the AC.

DFI SLI-DR in the pics.
http://s864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Benching%20Setups/
Hondacity
03-28-2010, 05:19 PM
what multi you using? cpuz please :D
Cecil
03-28-2010, 07:58 PM
Just using the stock x15. I dont know if its the board, or the BIOS, but there is no option to change the multi :thumbdown:

Got up to 286x15 with the same volts as above to pass burn test. Im aiming for 333 for 5Ghz air :)

Here is a 32m wprime I ran at 4.2HT. Its nuts how slow it is :blink:
Hondacity
03-28-2010, 08:13 PM
it is old technology...but with dice 6ghz is possible...hmmm multi should be higher though
Neuromancer
03-28-2010, 08:13 PM
Wow... and I thought ATOM sucked.. I forgot about Pee4 LOL

http://hwbot.org/community/submission/950483_neuromancer_wprime_32m_atom_230_1min_39sec_ 46ms

1m 39 seconds at 2GHz atom processor


geez man.. new props for a smart phone processor i guess.
Cecil
03-28-2010, 11:28 PM
it is old technology...but with dice 6ghz is possible...hmmm multi should be higher though

Its a 631 3Ghz, 15x is right.

Might be getting another Cely 356, NIB. Not sure yet.
Splave
03-29-2010, 11:48 AM
347s are what ya want!
Cecil
03-30-2010, 09:40 AM
4.5HT benchable with air :clapping:
Still slow as balls, but it seems like a good OCing chip. 1.48vcore, 1.4vtt, 1.45nb, 2.25vdimm. Ram is at 1000 4-4-4-12, definitly the best DDR2 Ive run. Will post benches once Pi 32m is done.

EDIT: Pi 32m BSOD :(
HITandRUN
03-30-2010, 11:36 AM
what multi you using? cpuz please :D

Cedar Mill 631 (http://www.cpu-world.com/CPUs/Pentium_4/Intel-Pentium%204%20631%203.0%20GHz%20-%20HH80552PG0802M%20%28BX80552631%29.html) max multi is 15 :)