Kal-EL
09-22-2009, 01:52 AM
This BIOS is ONLY for the EVGA X58 SLI Classified Motherboard (part number 141-BL-E759- )
S224 Updates:
Improves Bootup Bclock
Adds B2B CAS Delay
BIOS updating can be accomplished VIA the below methods:
CD/DVD Installation - Recommended installation method
Download the following .iso file: E759_S224.iso (ftp://ftp.evga.com/bios/E759_S224.iso)
Use a CD Burning software to burn the .iso image onto a blank CD (Nero, Alochol 120%, MagicISO etc.)
After it has burned, insert CD and restart the machine, go into the BIOS and load defaults, save and exit
Now set the CD Drive as the primary boot device, or press escape while the system is booting to select CD as the bootable device.
After flash remove the CD, and power off PC Completely.
Turn on the PC and load defaults in BIOS
USB FLOPPY Installation - Recommended installation method
Download the following executable: E759_S224.exe (ftp://ftp.evga.com/bios/E759_S224.exe)
Insert blank floppy disk into drive and run executable
After the floppy has written fully, restart the machine, go into the BIOS and load defaults, save and exit
Now set the USB Floppy as the primary boot device, or press escape while the system is booting to select USB Floppy as the bootable device
After flash remove the floppy, power off PC Completely
Turn on the PC and load defaults in BIOS
USB Flash Drive Installation - Alternate installation method
Download: E759S224.bin (ftp://ftp.evga.com/bios/E759S224.bin)
Visit this (http://www.evga.com/forums/tm.asp?m=671353) thread and follow the installation instructions. (thanks 30h6).
B2B Mem setting as mentioned by Karmakazi.
S224 Updates:
Improves Bootup Bclock
Adds B2B CAS Delay
BIOS updating can be accomplished VIA the below methods:
CD/DVD Installation - Recommended installation method
Download the following .iso file: E759_S224.iso (ftp://ftp.evga.com/bios/E759_S224.iso)
Use a CD Burning software to burn the .iso image onto a blank CD (Nero, Alochol 120%, MagicISO etc.)
After it has burned, insert CD and restart the machine, go into the BIOS and load defaults, save and exit
Now set the CD Drive as the primary boot device, or press escape while the system is booting to select CD as the bootable device.
After flash remove the CD, and power off PC Completely.
Turn on the PC and load defaults in BIOS
USB FLOPPY Installation - Recommended installation method
Download the following executable: E759_S224.exe (ftp://ftp.evga.com/bios/E759_S224.exe)
Insert blank floppy disk into drive and run executable
After the floppy has written fully, restart the machine, go into the BIOS and load defaults, save and exit
Now set the USB Floppy as the primary boot device, or press escape while the system is booting to select USB Floppy as the bootable device
After flash remove the floppy, power off PC Completely
Turn on the PC and load defaults in BIOS
USB Flash Drive Installation - Alternate installation method
Download: E759S224.bin (ftp://ftp.evga.com/bios/E759S224.bin)
Visit this (http://www.evga.com/forums/tm.asp?m=671353) thread and follow the installation instructions. (thanks 30h6).
B2B Mem setting as mentioned by Karmakazi.